RiMO ALPHA² LPG
RiMO ALPHA² LPG

RiMO ALPHA² LPG – the top model of RiMO gas-powered karts – comes with the most complete equipment and offers maximum driving fun and safety – just like all RiMO karts.

THE NEW DIMENSION OF KART RACING


DOUBLE THE PLEASURE

STANDARD EQUIPMENT OF THE ALPHA2 LPG

  • 31.8 mm frame (special tubing)
  • HONDA GX 200 LPG engine (4.8 kW / 6.5 hp)
  • HONDA 2:1 gear reduction (wet)
  • LPG equipment
  • LPG tank, 8 kg
  • Mechanical dual cable brake
  • 30 mm drive shaft (solid material)
  • Toothed belt drive
  • Full surround protection (special tubing)
  • Accelerator pedal stop
  • RiMO plastic seat (L/XL or XXL)
  • Fixed seat console, rubber-mounted
  • Fixed steering column stays
  • Upper clamp bearings as steering bearings
  • Caliba steering wheel
  • Replaceable steering column bearing support – bottom
  • Black bodywork, UV-resistant
  • RiMO factory design (changes annually)
  • DUNLOP tyres
  • Brake disc protection (special tubing)
  • Closed pedals
  • Stainless steel silencer system
  • Grease nipple at pedal
  • Folding pedal extension


OPTIONS AVAILABLE FOR THE ALPHA² LPG


! Some options are not compatible. Please contact our sales department if you have any questions relating thereto.

TECHNICAL DATA

L/W/H:
2020 / 1390 / 600-1200* *WITH ROLL BAR [OPTION]
Weight:
126 kg [BASIS]
Engines:
HONDA GX 200 LPG 4.8 KW | 6.5 PS [BASIS]

Tank capacity:
LPG, 8 kg

ENGINES

The following versions of HONDA GX engines, which are known for their reliability, are available for the ALPHA2 LPG:

HONDA GX 200 LPG 4.8 kW | 6.5 hp[STANDARD]

HONDA GX 200 LPG tuned 6.3 kW | 8.5 hp[OPTION]

HONDA GX 270 LPG 6.6 kW | 9 hp[OPTION]

HONDA GX 270 LPG tuned 9.6 kW | 13 hp[OPTION]

HONDA GX 390 LPG 9.6 kW | 13 hp[OPTION]
Manual
HONDA GX 120 | 160 | 200

Manual
HONDA GX 270 | 390

Tuning measures performed by professionals:
  • Removal of the speed limiter
  • Installation of tuning pistons
  • Upgrade of the camshaft
  • Widening of the valve seats and installation of special seats
  • Raise of compression
  • Post-treatment of the inlet and exhaust channel
  • Installation of a large, wedge-secured inlet and exhaust valve
  • Installation of reinforced valve springs
  • Installation of modified rocker arms
  • Mounting of rod assembly for accelerator operation [for engines without controller]
  • Change of the clutch retaining bolt to 10.9
  • Installation of Viton shaft seals (motor + clutch)
All engines will be installed without original tank* and without original silencer*.
*replaced by RiMO material

WEIGHT COMPENSATION SYSTEM

With the weight compensation system, it is possible to compensate the weight of the drivers with a difference of up to 30 kg – for even more balanced competitions.

SEAT ADJUSTMENT

The robust seat adjustment in the ALPHA2 allows adjusting the sitting position towards the steering wheel by 80 mm. Combined with the kart’s further adjustment possibilities, any personal adjustments can be realised.

TYRES

If your plans involve extraordinary events such as ice racing or drift challenges, you will also find the matching products in our portfolio. Ask us and learn more about the possibilities we offer.

The standard equipment of RiMO vehicles includes tried and tested SL1 DUNLOP tyres. The long-standing partnership with the established tyre manufacturer provides you and us with top service and consistently high quality.
Of course, you have the possibility to equip your ALPHA2 vehicles with any kart tyre brand you put your trust in. A huge selection of kart tyres can be found in our online shop.

BRAKING SYSTEMS

You have the choice between 2 RiMO braking systems: the mechanical dual cable braking system [STANDARD] and the redundant, self-adjusting, hydraulic DOT 5 dual-circuit braking system [OPTION].

The mechanic braking system included in the standard equipment of all RiMO petrol-powered and gas-powered karts ensures high braking force and adequate deceleration in every driving situation.
The redundant dual-circuit braking system - which is unique in the kart market – is operated with hydrophobic DOT 5 brake fluid. The integrated HBPS* ensures maximum security. *Hydraulic Brake Protection System

LPG EQUIPMENT

The RiMO LPG tank has a capacity of 8 kg and is firmly fixed to the frame. An original HONDA LPG carburettor matching the respective motor type allows for clean combustion with efficient mixture ratio.
The equipment of the ALPHA2 LPG also includes an LPG evaporator, raising the liquid gas to the required operating temperature with its elaborated, integrated preheating function.

BODYWORK AND DECALS

The bodywork of RiMO karts is made in Germany. The HDPE used is UV-resistant, petrol-resistant, impact-resistant and tear-resistant. The features of the flexible material are particularly suitable for the karts’ highly stressed bodywork.
The bodywork’s indestructibility is indispensable for both the safety of the drivers and the profitable operation of the kart racing track.
Decorating and wrapping your karts using a customised design has become an established means for the individualisation of your fleet and the use of the karts as driving advertising column.